1. Window treatment;

Remove all items such as plants, paintings, and other furniture items from the window and surrounding areas. In order to adapt to the installation process, it is occasionally required to move obstacles during window treatment, which is to organize the area around the window into an easily accessible area for operation.

2. Handling of personal belongings;

Remove furniture that may hinder the installer from applying glass film. The installer may need to remove or rearrange any furniture, which is something to be aware of before construction.

3. Ventilation dust;

During installation, in order to minimize ventilation dust, all windows' air conditioning and ventilation facilities should be turned off for the installation of bathroom membranes. This will reduce the amount of dust and fine particles in the air, while also cleaning the floor and vacuuming the carpet as much as possible the day before. During installation, the construction site should try to avoid human interference as much as possible.

4. Inspection before installation;

During the pre installation inspection, check all windows that need to be coated with film, paying attention to broken glass, loose glass, and any defects on the glass. Glass stickers, alarm systems, and any other items that may affect installation should be discussed and forgotten in the agreement on valuation and plan.

After installing the window film, the following precautions should be taken:

1. Curing cycle of window film;

During the installation process, the installation fluid between the window film and the glass will be squeezed out, leaving only a small amount of installation fluid residue inside. Installing water vapor may cause small bubbles or a slight hazy sensation! This is a normal phenomenon and should also be anticipated. During the curing process, do not attempt to squeeze out the water bubbles, as the water bubbles and haze will disappear. Attempting to squeeze out the water vapor bubbles will damage the window film, which is not included in the warranty.

2. Climate conditions and solidification cycles;

Low temperature, humid, and cloudy weather conditions can prolong the curing cycle, while warm weather and direct sunlight will shorten the curing cycle. The selection of window film type and climatic conditions will determine the curing cycle, while thick glass film and poor climatic conditions will prolong the curing cycle. The curing cycle can vary from a few days to as long as a month, and safety explosion-proof films always require longer curing cycles due to the increase in film thickness.

3. Cleaning and maintenance;

Do not clean the glass film within 30 days of installing it, as this will ensure the safe and appropriate curing of the glass with the dedicated installation adhesive.

4. Cleaning solution;

Most glass cleaning agents can effectively clean glass films, and an effective cleaning solution suitable for window films is a mixture of 1 liter of water and 10 milliliters of household cleaning solution.

5. Cleaning materials;

Clean and dry the surface of your glass film with a soft cleaning material. The scraping method is to use a soft cloth or a cleaning synthetic sponge to clean the glass film, and then use another cleaning soft cloth or rubber strip to dry the surface of the glass film.

To avoid scratching the glass film, do not use brushes, sponges with abrasives, or any cleaning materials with solid particles. When cleaning the inside and outside of the glass, use the same cleaning material, which will scratch the surface of the glass film. Rough enough to scratch the surface of the glass film, even with a protective hard coating, it cannot resist.